Storm

Storm has been sitting on my paint desk for a very long time. I don’t think I’ve been more intimidated about painting a model as I have been with Storm and it’s caused me to put off her paint job in favor of less intimidating models for quite some time. I’ve seen so many paint jobs on her where the light from the lightning is entirely (or almost entirely) ignored and I really wanted to avoid that. I really liked the idea of virtually all of the light coming from the lightning, to really show how powerful the lightning strike is and be a nice focal point for the paint job. I also liked the idea of having a powerful glow come from her eyes.

I recently learned with Blade that doing the OSL via airbrush before painting the model doesn’t work. I ended up having to redo the OSL by hand afterwards and I think the model suffered for it. In retrospect I should’ve just airbrushed red on him after painting him and then touched it up with a brush to make the OSL clean. So with Storm I decided to try that. After giving her a general prime I used airbrush white to lay out the areas that were going to be lit up from the lightning strike.

I then laid down base coats for her skin, outfit and hair. I then re-established the OSL using very light white spray from an airbrush. I then picked out the highest highlight colors and watered them down to turn them into a glaze and worked the OSL into the base coats. I played with this step for some time, trying to make the transitions smooth and all the while trying to remember to keep the highlights going in the direction of what would be lit up from the lightning.

After doing that I noticed that the black on her outfit in particular just didn’t look finished. The problem here is that all of the lighting is coming from either beneath her or behind her, so the darkest area on her is the front of her torso. However, just leaving it black was making it look unfinished, which is no good. The fix I came up with for this is to highlight up the darkest areas with just a layer or two of highlight, keeping them a very dark bluish grey, to give them some depth. If I kept this minimal, in theory it should give the black depth without taking away from the OSL.

Finally I struggled with what to do with the lightning itself. I’ve seen it painted blue, yellow and white and of those I liked blue the most, but having the OSL from the lightning being blue didn’t seem right to me, so I opted to try to keep the lightning on the lighter end of blue and keep the OSL white. I’m still not sold that this was the right decision, but I feel like the piece looks good enough that I should just call it.

Overall I have no idea how I feel about the paint job. Everything with it was so experimental and the results are so mixed that I’m just not sure if the decisions I made on how to achieve what I was going for were the right decisions. It will be interesting to go back and review this mini once I’ve had more time to sit with my feelings about it and perhaps after I’ve had more practice with similar techniques.

 Captain America (Sam Wilson)

Due to my experience with Domino, War Machine, Quicksilver, Amazing Spider-Man, etc. I've become very comfortable with explosions, so that part of Sam was really routine at this point and not worth getting into. If you want to read up on my process with those, I would recommend checking out my comments on one of those models.

Also with Sam, I had the benefit of just finishing my Iron Man repaint and that taught me a lot about how I can use white when highlighting red without turning the whole thing pink. I'm pretty happy with how his red turned out. It feels red and still has depth, light and shadow. In retrospect I think I should've gone darker with it in places, but I think it works well enough.

However, painting Sam was kind of a capstone experience for me for one pretty big reason: I've been holding up my Core Captain America mini as a beacon of pride for the past couple of years because the work I did on his shield was so far above and beyond what I had ever painted before. he kind of encapsulated what this project has come to mean to me. Thus, I knew going into it that the shield was going to be more important than most things I could paint, on a personal level. 

With the recent work I did on my Iron Man repaint, I approached the shield from a much different perspective than I did with Steve's. For one, I knew how to do NMM white, which wasn't even on my radar when I painted Steve. Two, I knew how to do white highlights on red without making it pink, which I specifically avoided on Steve, opting for orange/yellow highlights instead.

I think the end result puts Steve's shield to shame and puts me in a weird place as now when I look at Steve I see what could be instead of what was a giant leap forward in my painting skill. I'm still proud of the work I did on him, but it makes me very excited to get his repaint done and I might have to move up his model on my repaint list so I can play with a nice, new and improved paint job when I rock Avengers, which I will be jumping at the bit to do once I finish Hulkbuster.

 War Machine

Finished up War Machine this week. I went into this paint job thinking he was going to be a dull model to paint, particularly considering how monochromatic his paint scheme is. I couldn't have been more wrong and I think it's largely due to how detailed and well executed the sculpt is. He has so many little bits and bobs to highlight and shade that painting him just feels like playing and exploration. It reminded me of painting Daredevil. I also think it lends itself well to making the model stand out because you get to really crisply define each area and push an almost all black model all the way to white without it feeling awkward. Speaking of painting black, painting him really drove home how much more comfortable I've become with it. I can't imagine how much worse this model would look had I tried painting him two years ago when I was first tackling my core box. It makes me excited to do Black Widow, Punisher and Venom repaints.

I started with his base on the explosion and the jets. I really like my recipe for explosions and it's a very simple and easy to make recipe. I just paint the whole explosion white, paint the whole thing Inktense Yellow, then drybrush up into Mars Orange and Brown Leather. Then I go into the recesses with pure white to make the explosion look internally hot and add a few very watered down layers of white on the base itself, pooling towards the explosion, which I then color with the Yellow Inktensity. Gives a nice OSL effect and feels to me like a legit explosion. The harder part was getting the blue effect on the jets, which honestly I think is probably the sloppiest part of the model. For that I just used very thinned down Sky blue and layered it towards the boot. Overall I think it turned out well and hopefully the experience on him will make it go smoother when I attempt the same thing on Hulkbuster.

Speaking of Hulkbuster, this model is essentially one giant lesson in how to shade and highlight polished metal and flat and curved panels, so hopefully that helps as well. Painting him reminded me of what I learned with Moon Knight: that there is no logical endpoint to the highlighting, shading and blending. You can go on with it indefinitely. Overall I'm pretty happy with how War Machine turned out, but I still feel uneasy about if I'm picking the "right" stopping point. Should I have gone on more and made it have even more contrast? Should I have worked even more on transitions? I guess there is no concrete answer to those questions, which really gives me an appreciation for how deep this hobby is. I wonder if the hobby "greats" experience these same feelings as they paint models? I would imagine so.

Speaking of unending complexity, one of things I struggled with on War Machine was how much OSL and NMM reflection I should include. The jet boots could easily result in some serious OSL and when you combine this with his armor being some seriously polished metal, you could play for days on light reflections. I think I opted for the lazy way out with him, sticking with some very minor OSL on predominately the bottoms of his boots. I guess if I were trying to make him a display model I would've done sky reflections in his chrome and done major OSL coming from the blast on the base. However, I don't think he really needs it. I think he looks like a really solid model for playing games and that's really what I'm painting for.

Repaint - Iron Man

Iron Man becomes the second of the core set models that I repaint. The first take on him is on the right and the second take is on the left (in case it's not obvious). I chose to do Iron Man because at the time of writing this, Hulkbuster is expected to come out in the next couple of weeks and not only do I need to paint my own, but a friend of mine wants me to paint one for them and I want to be able to do it justice. With that in mind I decided to knock out my core set repaint of him as practice before I jump into a hulk of a model (pun intended) like Hulkbuster.

As far as painting him goes, I had the benefit of a Sorastro video guide, although I only really used it for the color recipe than where to lay down highlights. My big worry going into this and one that I've constantly had to battle with in this project is my reds turning into pinks from my highlights. I think the fact that I was laying down the red as a NMM where large chunks are staying a dark red helped a lot in preventing it from looking pink. Although I also have learned quite a bit about how "going all the way to white" with my highlights doesn't mean I have to progress evenly from my base color to white, which is really why my reds were turning to pinks. That gives me hope for future projects.

At no point did I look at the model and agonize over whether the highlights were going to be "too much" or in anyway be something I regret. Painting it just felt natural and it just kind of flowed. All of this made the process just kind of fly by. I can tell when I'm getting really into how a paint job is looking because I start acting out the character like I'm a kid playing in the backyard. I found myself at multiple points holding out my arm as if I was about to blast someone with a repulsor. Kind of silly, but I think I can take it as a genuine sign that I'm happy with my paint job, which is nice.

As happy as I am I recognize there's a lot to improve on. The pics helped reveal how much smoother the paint could be, particularly on the face. I never really found a way to do the eyes in a way that I think looks striking. It was so little area to play with that I just kind of kept it simple and left it alone. I think there's no end to how long I could've spend playing with highlights. and shadows. I'm still not sure how much that is due to it being NMM versus my just seeing more of what "could be" as a painter compared to previous paint jobs.

The crazy thing for me is comparing the new one to the first one. The first one was admittedly a huge experiment, but the quality to me on the paint jobs is so drastically different that I just kind of stare in awe at them. They don't feel like they are painted by the same person. It really makes me feel like I've grown so much as a painter, that it feels like the time in between the paint jobs has to be longer than it is. It's such a rewarding feeling. I'm getting ready to paint the rivals set with Doc Oc and Spidey, so I'm planning on repainting them sooner rather than later. They'll likely be next of my repaint list.